Vertex
The all-new Exmark Vertex stand-on zero-turn mower is ready to take your productivity and profitability to the next level. With a design that centralizes mass low in the mower chassis, Vertex is ultra-maneuverable, yet stable and easy to control. The control panel is ergonomically designed and centrally located to improve operator comfort. Exmark's proven hydro drive system delivers ground speeds of up to 8.5mph, enabling Vertex to quickly finish large jobs. Built with a Kawasaki V-Twin or Kohler EFI engine to increase fuel efficiency so you can stay out in the field longer. Choose from 32-, 36-, 48-, 52-, 60-, or 72-inch UltraCut side-discharge cutting decks, featuring easy rake adjustment and anti-scalp rollers, for an Exmark signature finish cut quality every time.,
Designed to raise the bar for stand-on mower performance, cut quality and durability, the all-new Vertex delivers productivity landscape professionals can depend on. Compact, maneuverable, and easy to operate, Vertex is the right tool for a wide range of mowing jobs.
The all-new Exmark Vertex commercial stand-on mowers make quick work of a wide range of mowing jobs. Every detail was considered, researched, designed, and tested to deliver the durability, cut quality and simplicity landscape professionals expect from Exmark.
Designed to place the operator in a position of comfortable control. The wide, open platform offers more room for the operator to adjust their stance, while the ergonomic control panel places all vital controls close for easy reach and operation.
All models are equipped with Exmark UltraCut Series 4 side-discharge cutting decks. The decks feature flow-control baffles, anti-scalp rollers, and a rod-style floating deck design for easy deck rake adjustments. The result is a signature cut quality on any turf type.
These units are easy to service thanks to the tools-free access to the engine and hydro drive components. The reliable single-belt drive system is simple and easy to maintain, and Exmark’s patented spherical idler bearings require only annual lubrication.
The single-point height of cut makes it easy to accurately set deck height without tools. This enables the operator to quickly change cut height by simply raising and lowering the deck.
Vertex Specs
| Product | Power | Deck Size | Deck | Fuel Capacity | Transmission | Ground Speed | Acres Per Hour | Cutting Height | Blade Engagement | Front Casters | Drive Tires | Bag Capacity | Warranty |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
Vertex E-Series
|
18.5HP Kawasaki FS600V V-Twin
|
32" |
UltraCut Series 3
|
5.0gal
|
Hydraulic Pump and Wheel Motor
|
7.5mph
|
1.94 |
1.0" to 4.5" in 0.25" increments
|
Electromagnetic Clutch
|
9x4.50-5 Semi-Pneumatic
|
21x7.0-10 |
Optional 3-Bushel Bagger, Optional UltraVac 2-Bag on 52"/60"
X-Series Only
|
4-Year or 750 Hours, Limited, No Hour Limit First Two Years
|
| 36" | 2.18 | 21x8.5-10 | |||||||||||
|
Vertex S-Series
|
23.5HP Kawasaki FX730V V-Twin
|
48" |
UltraCut Series 4
|
8.0gal
|
8.5mph
|
3.29 |
1.5" to 5.0" in 0.25" increments
|
13x5.0-6 Semi-Pneumatic
|
20x10.0-8
|
4-Year or 1,250 Hours, Limited, No Hour Limit First Two
Years
|
|||
| 52" | 3.56 | ||||||||||||
| 60" | 4.11 | ||||||||||||
|
25HP Kohler ECV740 Command PRO EFI
|
48" | 3.29 | |||||||||||
| 52" | 3.56 | ||||||||||||
| 60" | 4.11 | ||||||||||||
|
Vertex X-Series
|
35HP Kawasaki FX1000V V-Twin, 38.5HP Kawasaki FX1000V EFI
V-Twin
|
52" |
UltraCut Series 6
|
14.0gal
|
12.0mph
|
5.03 |
15x6.0-6 Semi-Pneumatic
|
24x9.0-12 |
5-Year or 1,500 Hours, Limited, No Hour Limit First Two
Years
|
||||
| 60" | 5.81 |
24x12.0-12
|
|||||||||||
| 72" |
6.97 |